异质性环境规制对绿色全要素生产率的影响机制——基于能源消费结构的调节作用

为探讨能源消费结构调节下异质性环境规制对绿色全要素生产率的影响机制，论文利用SBM方向距离函数测得全国各省市“经济-资源-环境-社会”四位一体的绿色全要素生产率，并将环境规制工具分为命令控制型、经济激励型、治理投入型和公众参与型4类，构建了空间杜宾模型以及门槛效应模型，进而得出在能源消费结构调节下，异质性环境规制对绿色全要素生产率的直接作用、间接作用以及空间溢出效应。研究结果表明：1）经济激励型和公众参与型环境规制通过调节能源消费结构对当地和邻地的绿色全要素生产率产生影响；2）在门槛检验方面，能源消费结构对命令控制型、经济激励型和公众参与型环境规制影响绿色全要素生产率存在门槛效应，同时在能源消费结构调节下，命令控制型和经济激励型环境规制对其本身对绿色全要素生产率的间接作用存在门槛效应。建议政府在制定环境规制时要考虑到其与能源消费结构的交互作用，并且在不同能源消费水平地区采用适宜的规制方法和强度，以更好地发挥环境规制作用。     

An effective method of bulk materials moisture measurement using capacitive sensors

When we speak about capacitance moisture meters for bulk materials we have to face with different values of dielectric permittivity for different bulk materials in dehydrated state, what causes a method error that can be named ‘type uncertainty’. Besides, different varieties of the same material have different values of dielectric permittivity, which depend from geographical origin, processing conditions etc. It can be hardly predicted automatically and type uncertainty can be compensated only in separate situations with the help of preliminary calibration. Main tasks of the research are to develop new comparison principle of moisture measurement with better accuracy due to effective compensation of physical, chemical and granulometric composition influence on the result of moisture measurement, develop new primary and secondary instrument transducers. Moisture sensor consists of four measuring capacitors. Two of them should be filled with a sample, which moisture content should be determined, and other pair of measuring capacitors should be filled with a same substance, but previously dehydrated. Mathematical models, developed to take into account granulometric composition of a bulk material were used to carry out a comparison analysis for three types of instrument measuring transducers. Obtained results proved that suggested principle of moisture measurement provides effective compensation of granulometric composition influence. Developed measuring principle had been experimentally tested what helped to confirm that it provides two times better compensation of different physical and chemical composition for different materials in comparison with the direct comparison method.     

Noncentrosymmetric Tetrel Pnictides RuSi4P4 and IrSi3P3: Nonlinear Optical Materials with Outstanding Laser Damage Threshold

Noncentrosymmetric (NCS) tetrel pnictides have recently generated interest as nonlinear optical (NLO) materials due to their second harmonic generation (SHG) activity and large laser damage threshold (LDT). Herein nonmetal-rich silicon phosphides RuSi₄P₄ and IrSi₃P₃ are synthesized and characterized. Their crystal structures are reinvestigated using single crystal X-ray diffraction and ²⁹Si and ³¹P magic angle spinning NMR. In agreement with previous report RuSi₄P₄ crystallizes in NCS space group P1, while IrSi₃P₃ is found to crystallize in NCS space group Cm, in contrast with the previously reported space group C2. A combination of DFT calculations and diffuse reflectance measurements reveals RuSi₄P₄ and IrSi₃P₃ to be wide bandgap (E_g) semiconductors, E_g = 1.9 and 1.8 eV, respectively. RuSi₄P₄ and IrSi₃P₃ outperform the current state-of-the-art infrared SHG material, AgGaS₂, both in SHG activity and laser inducer damage threshold. Due to the combination of high thermal stabilities (up to 1373 K), wide bandgaps (≈2 eV), NCS crystal structures, strong SHG responses, and large LDT values, RuSi₄P₄ and IrSi₃P₃ are promising candidates for longer wavelength NLO materials.     

基于SolidWorks和三坐标测量仪的螺杆转子精滚刀建模与检测方法

介绍了基于SolidWorks软件的螺杆转子精加工滚刀的一种精确建模方法和利用该模型对滚刀的关键工序进行模拟验证的方法,同时介绍了在三坐标测量仪上利用螺杆转子精滚刀模型和曲线功能对螺杆转子精滚刀齿形进行检测的方法。     

机械工厂三坐标测量室的设计探讨

对三坐标测量机(CMM)的分类和结构形式进行分析,围绕三坐标测量室设计中的选址、起吊方式、暖通空调、地坪、隔振、照明等问题进行探讨.结合设计实践,重点针对待测工件的起吊运输方式,给出相应的解决方案,并分析了各种方案的优缺点.     

全地域机动车驾驶室声学特性分析

以某全地域机动车驾驶室为研究对象,建立驾驶室的有限元模型,验证了有限元模型的有效性。以此有限元模型为基础构建驾驶室谐响应模型,进行谐响应分析,发现驾驶室后壁板的振动是引起驾驶室内部噪声的主要原因。研究驾驶室内部噪声特性,分别进行了声学空腔模态分析和声固耦合模态分析,发现声固耦合系统声压分布比较均匀,大部分呈现局部模态,主要原因可能是驾驶室后壁板的振动。通过驾驶员耳旁声压分析发现增加驾驶室后壁板的厚度,可以在一定程度内降低驾驶室内部噪声对驾驶员的影响,为同类驾驶室通过依靠结构改进来改善声场环境提供了案例依据。     

全自动影像测量仪中双相机精确定位方法研究

为了实现影像测量仪双相机的精确定位,以满足批量多种类零件自动化测量需求。在现有的影像测量仪上引入由大视野相机构成的视觉引导模块,文中以改进后的影像测量仪为平台,利用大视野相机得到标定板的角点位置信息,结合小视野相机获得的实际位置信息,通过仿射变换建立两者之间的坐标转换关系,确定双相机之间的位置关系,实现双相机之间的相互精确定位。定位实验结果表明了文章所提方法的有效性,相对于传统定位方法其定位精度提高了16%,能够满足批量多种类零件自动化测量的需求,为后续的自动测量工作奠定了基础。     

基于二维活码的计量仪器设备管理系统的应用

针对目前计量仪器设备信息种类多、数据量大、设备检定及维护任务重、管理信息化水平较低等问题,结合质量计量监督检测部门所处具体环境,设计基于二维活码技术的计量仪器设备管理系统,本文分别从系统功能、组成、开发技术应用效果等方面进行论述,该系统能有效地提高了相关人员的工作效率,为各检测机构的设备管理工作提供了可借鉴模式。     

里底水电站混凝土强度与波速线性关系研究及应用

混凝土工程是电站枢纽工程最重要的组成部分之一,是工程安全的基础和保障,确保混凝土实体质量、杜绝混凝土质量缺陷是电站安全稳定运行的基本保证。随着声波检测技术水平的提高,并已在大坝混凝土工程中得到广泛应用。通过大量混凝土实测抗压强度和声波波速值对比试验的数理统计分析,建立工程专用测强曲线,能有效提高混凝土抗压强度推算值的准确性,较真实地反映混凝土实体质量水平。